Product Details
Light Control
Room Darkening
Slat/Louver
Size
2 1/2"
Valance
3 1/4" Decorative valance included
Cornice Style Valance
Optional side returns for Inside Mount blinds
Lift Control
Left or Right Cord
Depending on width, there will be multiple outer lift cords hanging on the front of the blind and all need to be pulled at the same time for the blind to raise/lower evenly.
Following Window Covering Safety Standard lift cord and tilt cords will be 1/3rd (33%) of the ordered height.
Depending on width, there will be multiple outer lift cords hanging on the front of the blind and all need to be pulled at the same time for the blind to raise/lower evenly.
Following Window Covering Safety Standard lift cord and tilt cords will be 1/3rd (33%) of the ordered height.
Tilt Control
Left or Right Wand or Cord
Other
Colors coordinate with Aspen 1" Faux Wood Blinds and Aspen Faux Wood Vertical Blinds.
Measure & Install
How To Measure
How To Install
Professional
Measuring & Installation
Standard Lift Specifications
Width:
8" - 96"
Height:
12" - 120"
Minimum Mounting Depth:
0.75"
Minimum Flush Mounting Depth:
3.25"
Headrail Dimension:
1 1/2" x 2"
2 on 1 Headrail Specifications
Because large blinds are difficult to raise and lower, the 2 on 1 headrail option allows two smaller blinds to share a common headrail and valance. This gives the overall blinds a cleaner appearance.
Routless Ladders(No Holes Privacy)
Routless ladders are designed to block additional light when the blinds are closed. Each slat does not have a rout hole for the lift cords, but instead they run on the outsides of the slats.
Due to the unique cording techniques used on routless blinds, lowering them may require assistance.
Due to the unique cording techniques used on routless blinds, lowering them may require assistance.
Free Features

Lift Cord
The lift cord is used to raise and lower the blinds. This option allows you to select the position of the cord on the blinds.

Tilt Cord/Wand
The tilt cord or wand is used to open and close the blind slats. This option allows you to select the position of the tilt control on the blinds. The tilt control varies by product whether it is a cord or wand type control.

Tilt Control
The tilter control is used to open and shut the blinds. Tilter control options are either a traditional wand or a cord pull. We recommend the cord pull for easier use and durability.

Cornice Style Valance
Valance returns create a "cornice" style valance. Inside mount valance returns are shorter than outside mount returns and extend about 1/2 to 1 inch past the window frame on each side. The cornice valance offer a more elegant look than no returns. A valance on an inside mount blind will be mounted outside the window frame while the blinds remain inside the window frame. Not recommended with windows that have moulding.
Note: Blind must be mount to the front of the window frame opening.
Note: Blind must be mount to the front of the window frame opening.