Video Description
Magnetic Roman shades deliver the classic, tailored look of Romans without any cords. Hidden magnets (and/or strike plates) are placed along the back so the shade clicks into set positions as you raise it, and releases smoothly when you lower it. This page shows the simple, cord-free method to lift, lower, and fine-tune the folds—plus quick fixes if the shade won’t hold or looks uneven.
Know the Parts
- Headrail: Fixed top rail mounted to the brackets.
- Bottom rail/hem bar: The handhold you’ll lift/lower.
- Magnet points: Hidden along the back of the fabric; align with matching plates/magnets to “catch” at set heights.
- Ribs (back): Keep folds crisp and even.
Basic Operation (Cordless)
- Raise the shade: From the center of the bottom rail, lift upward with two hands. As folds stack, you’ll feel magnetic “clicks.” Pause at your desired height; the magnets hold the shade in place.
- Lower the shade: Support the bottom rail and give a gentle, straight-down pull to release the nearest magnet set. Guide the fabric down in stages until fully lowered.
- Set a position: Stop at any magnetic increment. Smooth the front face with a light hand pass to sharpen the folds.
Pro Tips for Smooth, Even Folds
- Lift from center: Two-hand, centered lifts keep both sides even so all magnets engage together.
- Smooth as you go: After stopping at a height, lightly brush the front to align pleats for a crisp, tailored look.
- Break the hold cleanly: When lowering, pull straight down to release; avoid yanking one corner first.
- Level check: If one side sits higher, re-seat the headrail fully in its brackets and operate from the center to re-align.
Light & Privacy Notes
- Light-filtering: Ideal for daytime glow with privacy.
- Blackout: Darker rooms at night; for the tightest seal, consider an outside mount or side panels to reduce edge light.
Care & Cleaning
- Dust with a microfiber duster or vacuum gently with a brush attachment.
- Spot-clean with mild soap and water (test an inconspicuous area first).
- Avoid harsh chemicals that can affect fabric and magnetic components.
Troubleshooting
- Won’t stay up: Wipe magnet/strike areas to remove dust; lift from the center so both sides engage; verify the headrail is level and fully latched in brackets.
- Uneven stack: Raise fully to “reset” folds, then lower and re-raise from the center. Check that nothing snags behind the fabric (handles, locks, trim).
- Hard to release: Use a slow, straight-down pull to break the magnetic hold; avoid pulling one corner first.
Need fabric or opacity samples before you buy more? Request free swatches to compare in your lighting. Shop our complete line of custom-made fabric Roman shades
Magnetic Roman Shades — FAQs
How do magnetic Roman shades work without cords?
Magnets (and/or metal strike plates) are positioned along the back of the shade. As you lift from the center, the folds stack and “click” into place at preset points. To lower, pull straight down to release the magnets and guide the fabric down.
Where should I hold the shade to raise and lower it?
Always operate from the center of the bottom rail using two hands. Centered lifts keep both sides even so magnets engage uniformly; centered pulls release the hold cleanly when lowering.
Can I stop the shade at any height?
Yes—stop at any magnetic increment. You’ll feel a light “click” as the magnets engage. Smooth the front face with your hand to sharpen folds at that position.
What if the shade won’t hold or looks uneven on one side?
Lift from the center so both sides engage together, wipe dust from magnet/strike areas, and confirm the headrail is fully latched and level. Raise fully to reset folds, then try again. If issues persist, share a photo for tailored support.
Are magnetic Roman shades safe for homes with kids and pets?
Yes. They’re completely cordless, eliminating all cords. Teach children to lift from the center of the rail and keep furniture that enables climbing away from windows.
Need more choices? Shop our entire line of custom-made window shades
