Note: Made with blackout fabric and designed for near-total blackout, these shades block about 99% of light. Minimal edge gaps may allow a small amount of light in, which is standard for blackout shades. For added light control, consider adding our Side Light Blockers.
Looking for more styles? See our full selection of
custom Roller Shades.
Want more light control? Shop all of our quality blackout shades.
Product Details
Light Control
Blackout
Bottom
Sealed Hem Bar
Cleaning and Care
Roller shade fabrics are virtually maintenance free. If the shade is dusty, simply vacuum over it using an upholstery attachment. A dusting cloth can also be used to gently remove dust. Shades may also be gently wiped with a clean damp cloth. Allow the shade to dry completely before raising. Do NOT completely immerse.
Fabric Gap (Deductions)
Light Gap by Side & Lift Control
Light gaps are normal and vary by lift type. To ensure proper operation, fabric is made slightly narrower than the overall shade width (bracket-to-bracket).
Continuous Cord Loop
• 9/16" on Chain Side
• 7/16" on Opposite Side
• Approx. 1" Total Light Gap
Continuous Cord Loop w/ Cassette
• 3/4" on Chain Side
• 5/8" on Opposite Side
• Approx. 1 3/8" Total Light Gap
Cordless
Applies to standard and cassette options
• 5/8" on Each Side
• Approx. 1 1/4" Total Light Gap
Motorized
• 9/16" on Motor (Control) Side
• 7/16" on Opposite Side
• Approx. 1" Total Light Gap
Motorized w/ Cassette
• 3/4" on Motor (Control) Side
• 7/16" on Opposite Side
• Approx. 1 1/16" Total Light Gap
Flame Retardant
Fabric is specified as flame retardant.
Measure & Install
How To Measure
How To Install
Professional
Measuring & Installation
General Specifications
Width
12" - 107"
Height
12" - 156"
Minimum Mounting Depth
2 1/2"
Minimum Flush Mounting Depth
3 1/4"
Cassette Headrail
The cassette headrail comes with a matching fabric strip.
Width
20" -
96"
Height
20" -
120"
Headrail Dimension
3 1/2" x 3 1/2"
Minimum Mounting Depth
1 5/8"
Minimum Flush Mounting Depth
4"
Square Aluminum Fascia Valance
3" and 4" square aluminum fascia is made from an "L" shaped aluminum extrusion, covering the bottom and front of the roller. Valance snaps into brackets and fittings concealing the roller.
Size varies based on the roller thickness or length of the shade. Available in standard roll only, not available in reverse roll.
Size varies based on the roller thickness or length of the shade. Available in standard roll only, not available in reverse roll.
Width
18" -
107"
Height
12" -
102"
Minimum Mounting Depth
2 1/2" for 3" Fascia
3 1/2" for 4" Fascia
3 1/2" for 4" Fascia
Minimum Flush Mount Depth (Inside Mount)
3 1/8" for 3" Fascia
4 1/8" for 4" Fascia
4 1/8" for 4" Fascia
Continuous Cord Loop
This lift option has a looping lift cord adjacent to the shade. The fabric/material is narrower on the control side allowing the control to hang to the side without interfering with the lift of the shade. Shades with Continuous Cord Loop option may have a light gap on black-out shades.
Cordless Lift
Raise and lower your blinds without cords. This upgrade is great for homes with children because there are no dangerous lift cords. Not recommended for sizes wider than 96 inches.
Width
20" -
78"
Height
12" -
78"
Motorization
Make sure to order at least one remote or smart hub to control your motorized shades. One remote can operate more than one shade. Raise and lower your window shades with the touch of a finger. Our remote controlled shades use a radio technology system.
Width
14" -
72"
Height
13" -
72"
Power Type
AA lithium battery packs (included)
Battery Life Expectancy
1 - 2 years
Control Options
Remote Control or Wireless Wall Switch - must order at least 1 remote control
Compatible with Smart Home Devices
No
Z-wave Compatible
No
Guaranteed to Fit
Let us take the worry out of measuring. Upgrade with our Guaranteed to Fit protection. If your blind doesn't fit we will remake it for you.
If you make a mistake, we've got you covered. learn more
If you make a mistake, we've got you covered. learn more
Remote - 1 Channel
Control a single window shade or a group of window shades at ONCE. Single channel remote will only operate multiple shades together, not individually.
Remote - 5 Channel
Control up to 5 window shades or 5 groups of window shades with the same remote.
Available Customization Options
Roll Type
The side in which the fabric comes of the roll and whether the roll is visible. With the standard roll, the fabric comes down behind the roll next to the wall and the roll is visible inside the house. This option keeps the fabric tight to the wall on an outside mount. Reverse roll brings the fabric down in front of the roll and hides the roll from the house side of the roller shade.
