Ultimate privacy and light control are yours in our Signature 3/4" Blackout Single Cell Shades. Constructed of soft, thick micro-fiber, these shades provide your rooms with noise-minimizing, energy-saving insulation while allowing you to determine the amount of light and privacy with the concealed lift cords. And the D-shaped honeycomb cells ensure the shape retention and enduring attractiveness.
Note: Made with blackout fabric and designed for near-total blackout, these shades block about 99% of light. Minimal edge gaps may allow a small amount of light in, which is standard for blackout shades. For added light control, consider adding our
Side Light Blockers.
Professional
Measuring & Installation
Minimum Flush Mounting Depth
2 1/2"
Headrail Dimension
2" x 0.5"
Because large blinds and shades can be heavier and more difficult to raise and lower, the 2-on-1 or 3-on-1 headrail option allows two or three smaller shades to share one common headrail and valance. This creates a cleaner, more streamlined look across wider windows.
A small 1/4" to 1/2" gap between adjacent shades is normal and required for proper operation.
This lift option has a looping lift cord adjacent to the shade. The fabric/material is narrower on the control side allowing the control to hang to the side without interfering with the lift of the shade. Shades with Continuous Cord Loop option may have a light gap on black-out shades.
Raise and lower your blinds without cords. This upgrade is great for homes with children because there are no dangerous lift cords. Not recommended for sizes wider than 96 inches.
Note: Cell shade cordless headrails come with a white headrail.
Lower the shades from the top or raise them from the bottom. This option allows you to do either or both at the same time. Lower your shades from the top allowing for privacy while the shades are partially open.
Note: Two separate cords on opposite sides of the shade. Can only come with lift cord on the right and the top down cord on the left.
Free Features