Distressed 2" Wood Blinds

Add a rustic look to any room with our Distressed 2 inch Wood Blinds. Each basswood slat has been distressed to offer an antiqued appearance to the wood blinds. These rustic basswood blinds are custom-crafted, durable and warp resistant. Each real wood blind comes standard with a matching distressed wood valance and distressed bottom rail as well as the mounting hardware.

Note: Scratches, dents and nicks as well as color variation are part of the look of these wood blinds. This is not flaw or damaged blind as they are designed to look "rustic". We highly recommend ordering samples of this wooden blind before order.

Bookmark/Share this product:

Free Blind Samples
How To Measure
How To Install

Instant Savings! Dont forget to enter coupon at checkout for the 30% Off Savings!

Chestnut	Oak	Pecan

	2 on 1 Headrail Because large blinds are difficult to raise and lower, the 2 on 1 and 3 on 1 headrail allows multiple smaller blinds to share a common headrail and valance. This gives the overall blinds a cleaner appearance.
	Routless Ladders(No Holes Privacy) Routless ladders are designed to block additional light when the blinds are closed. Each slat does not have a rout hole for the lift cords, but instead they run on the outsides of the slats. Due to the unique cording techniques used on routless blinds, lowering them may require assistance.

Shipping
Each of our blinds and shades are custom made to your specifications. You can expect them to arrive approximately 2 to 2 1/2 weeks after ordering. Standard shipping is UPS or FedEx ground.
Product Specifications
Width:	12" - 120"
Height:	12" - 120"
Free Features
	Lift Cord The lift cord is used to raise and lower the blinds. This option allows you to select the position of the cord on the blinds.
	Tilt Cord/Wand The tilt cord or wand is used to open and close the blind slats. This option allows you to select the position of the tilt control on the blinds. The tilt control varies by product whether it is a cord or wand type control.
	Tilt Control The tilter control is used to open and shut the blinds. Tilter control options are either a traditional wand or a cord pull. Blinds Chalet recommends the cord pull for easier use and durability.
	Cornice Style Valance Valance returns create a "cornice" style valance. Inside mount valance returns are shorter than outside mount returns and extend about 1 inch past the window frame on each side. The cornice valance offer a more elegant look than no returns. A valance on an inside mount blind will be mounted outside the window frame while the blinds remain inside the window frame. Not recommended with windows that have moulding. Note: Blind must be mount to the front of the window frame opening.