Chalet Composite Shutters - Stains

Our realistic stain Composite Shutters are made from a combination of American hardwood and polymer materials to withstand warping, cracking, and chipping. Our plantation shutters look so close to real wood you will not be able to tell the difference.

Our shutter tilt bar features a "no mouse hole" design. This allows each louver to close tighter in both directions. Made with a patented, spring-loaded design to minimize light gaps on the side of each louver for added privacy and light control.

Made in USA. Each plantation shutter is fabricated within 15 business days. Not the typical 6 to 8 weeks delivery for shutters.

Bookmark/Share this product:

Free Blind Samples
How To Measure
How To Install

Instant Savings! Dont forget to enter coupon at checkout for the 30% Off Savings!

Cherry	Golden Oak	Honey Maple

This product has no upgrades available.

Shipping

Each of our blinds and shades are custom made to your specifications. You can expect them to arrive approximately 2 to 2 1/2 weeks after ordering. Standard shipping is UPS or FedEx ground.

Product Specifications

Width:

12" - 96"

Height:

16" - 96"

Free Features

Frame Type

The type of shutter frame is somewhat determined by the window.
Inside Mount
Hanging Strip For windows with at least 2.5" of depth with inside mount.
Z-Frame For inside mount shutters with at least 2.5" of depth.
Outside Mount
L-Frame For outside mount shutters with or without molding. May be mounted on top of existing molding. Frame size = 1 5/8"
2 1/4" Face Mount For outside mount shutters with or without molding. May be mounted on top of existing molding. Frame size = 2 1/4"

Frame Sides

The number of sides of the shutter frame. 4 sides are standard but for instance if your window has an extruding window sill 3 sides is recommended.

Number of Panels

Determined by the width of your window, the number of shutter panels within the shutter frame. You can adjust this number to customize your shutter design, look, and feel. When more than one panel is selected they will be equal size.

Panel Fold

How each panel attaches to the frame and the other shutter panels. Shutter configurations are when looking at the shutter from inside the house and are listed from left to right.
L=Left
R=Right
T=T post divider(used to add strength to the shutter)

Divider Rail

Divider rails are used to add strength and stiffen the shutter panels. Shutter panels over 60 inches in height will require a divider rail. Divider rails allow the top and bottom portions of the panel to be tilted open and close independently but do not allow the top and bottom sections to swing open separately. The measurement for the divider rail position is from the bottom of the shutter panel to the center of the divider rail.