Classic Room Darkening Roller Shades
Suntec Blackout Vinyl Roller Shades
Each blackout panel track blind comes standard with a matching dust cover valance to cover the headrail at the top of the blinds.
Split Draw is available with cord control only on these blackout roller blinds. One way draw offers cord control or wand control. The cord control is on the the side the panels draw to or the wand will be on the side opposite the side the panels draw to.
Note: Made with blackout fabric and designed for near-total blackout, these shades block about 99% of light. Minimal edge gaps may allow a small amount of light in, which is standard for blackout shades. For added light control, consider adding our Side Light Blockers.
Looking for more styles? See our full selection of
quality Panel Track Blinds.
Want more light control? Shop all of our custom blackout shades.
Product Details
Measure & Install
How To Measure
Professional
Measuring & Installation
General Specifications
Width
27" - 192"
Height
24" - 144"
Minimum Mounting Depth
3"
Minimum Flush Mounting Depth
4 1/8"
Free Features
Tilt Control
The tilter control is used to open and shut the blinds. Tilter control options are either a traditional wand or a continuous loop cord with tensioner device.
Stack Side
Specify the location of where the vanes gather when the blinds are drawn open.
Track Color
Specify the color of the panel track system.
Note: Panels are approximately 22" - 28" wide. This means there will be a stack of panels on each side they are draw open. You will need to add additional width and use outside mount if you do not want to block any of the view through the window. Mounting depth will vary based on window size.
| Panel Track Configuration | ||||
| Width | Panel Configuration | |||
| 27" - 79" | One Way | 2 panels | 2 channels | 1 overlaps |
| 39" - 117" | One Way | 3 panels | 3 channels | 2 overlaps |
| 51" - 155" | One Way | 4 panels | 4 channels | 3 overlaps |
| 63" - 192" | One Way | 5 panels | 5 channels | 4 overlaps |
| 51" - 155" | Split Draw | 4 panels | 3 channels | 3 overlaps |
| 75" - 192" | Split Draw | 6 panels | 4 channels | 5 overlaps |
| 99" - 192" | Split Draw | 8 panels | 5 channels | 7 overlaps |
| Panel Track Mount Depths | |||
| Track Dimensions & Depth Requirements | Min. Depth Required for Inside Mount | Min. Depth Required for Flush Mount | Min. Outside Mounting Surface |
| 2 Channel Track: 5/8"h x 1 5/8"w | 2" | 2" | 2 5/8" |
| 3 Channel Track: 5/8"h x 2"w | 2 1/2" | 2 3/4" | 2 3/8" |
| 4 Channel Track: 5/8"h x 2 3/4"w | 2 1/2" | 2 1/2" | 3 1/8" |
| 5 Channel Track: 5/8"h x 3 3/8"w | 3" | 4 1/8" | 4 3/4" |
